Nokia Codes Tips And Tricks

Welcome to Eunitwap.wordpress.com,today,I am giving out some cheat codes.Cheat Zone

  • Nokia Cheats
  • Nokia

    To check the IMEI(International Mobile Equipment Identity) Type:

  • *#06#
  • Information You Get:

  • XXXXXX XX XXXXXX X
  • TAC FAC SNR SP
  • TAC = Type Approval Code
  • FAC = Final Assembly Code
  • SNR = Serial number SP = Spare
  • To check the phones Software revision

  • *#0000#
  • Information you get from the Software revision

    V 05.31

  • 18-02-99
  • NSE-3
  • ¤¤1ST Line = Software revision
    ¤¤2ND Line = The date of the software release
    ¤¤3RD Line = Phone type

    To enter the service menu

    *#92702689# (*#WAR0ANTY# )

  • Serial number (IMEI)
  • Production date (MM/YY)
  • Purchase date (MM/YY)
  • You can only enter the date once.
  • Date of last repair (0000=No repair)
  • Transfer user data to another Nokia phone via Infra-Red
  • Clock Stopping

  • To check weather your SIM Card supports clock stopping type- *#746025625# (*# SIM0CLOCK#)
  • Revealing the Headphone and Car-Kit menus

  • Please note that if you do these next tricks, the new menus can’t be erased without retoring the factory default settings. To do these tricks you need to short-circuit the pins on the bottom of the phone next to where you plug in you charger.
  • 1. To activate the “Headset” menu, you need to short-circuit pins “3” and “4”. After a short time the word “Headset” will be shown in the display. Menu 3-6 is now enabled.
  • 2. To activate the “Car” menu, you need to short-circuit pins “4” and “5”. After a short time the word “Car” will be shown in the display. Menu 3-7 is now enabled.
  • 2. To activate the “Car” menu, you need to short-circuit pins “4” and “5”. After a short time the word “Car” will be shown in the display. Menu 3-7 is now enabled.
  • THE REBOOT TRICKThis should work on all software versions of the 6110.

  • 1. Go to the Calendar (Menu-8)
  • 2. Make a note or reminder.
  • 3. Enter some text into the edit box.
  • 4. Hold “Clear” until the whole text is cleared, then press “Back”.
  • 5. Press “0”. The main screen will now be showing but a space appears on the screen. (you can’t see it)
  • 6. Enter 4 digits (e.g. 1234).
  • 7. Use the down arrow to move the cursor to the left side of the numbers and the space (Down arrow twice).
  • 8. Now enter 6 digits and press the call button.
  • Wait for a few seconds, the screen should start to flash and reboots. It should alsowork on other menus like the “Profiles” menu.
  • EFR CALL QUALITY

  • To activate EFR (Enhanced Full Rate) Enter the code- *3370#.
  • This improves call quality but decreases batterylife by about 5% To deactivate it, Enter the code— #3370#
  • THE JAMES BOND TRICK

  • If you short-circuit theleft middle and right pins on the bottom of the phone with all connections touching each other, the Nokia software hangs! The profile “Headset” will be activated. Before you do this just activate the “Automatic Answer” in the
    headset profile and set the ringing volume to “Mute”. Now you can use your phone for checking out what people are talking about in a room. Just place it under a table in a room and call it. The phone receives the call without ringing and you can listen to what people are saying.
  • phones
    SIM-LOCK CHECKS

  • #PW+1234567890+1# = GIVES PROVIDER-LOCK STATUS
  • #PW+1234567890+2# = GIVES NETWORK-LOCK STATUS
  • #PW+1234567890+3# = GIVES COUNTRY-LOCK STATUS
  • #PW+1234567890+4# = GIVES SIM-CARD-LOCK STATUS.
  • Cheat Master




    Note:Please,while commenting,do not spam.

  • Compiled:
  • Leave a Reply

    Fill in your details below or click an icon to log in:

    WordPress.com Logo

    You are commenting using your WordPress.com account. Log Out / Change )

    Twitter picture

    You are commenting using your Twitter account. Log Out / Change )

    Facebook photo

    You are commenting using your Facebook account. Log Out / Change )

    Google+ photo

    You are commenting using your Google+ account. Log Out / Change )

    Connecting to %s